Backyard Metal Gate Installation in Burbank | Secure Custom Backyard Gates
Burbank Custom Metal & Electric Gates provides backyard metal gate installation in Burbank for better access control without sacrificing curb appeal. We fabricate residential access entryways, sliding backyard enclosures, and decorative perimeter access systems that give homeowners more privacy and stronger security around side yards, patios, and rear entrances. Using powder-coated steel frames, welded aluminum structures, and custom ironwork fabrication details, our team creates gates that match the home instead of standing out for the wrong reasons. Some projects call for simple side yard security solutions, while others need automated residential barriers or lockable rear property access tied into a larger fence system. We also install private outdoor entry systems designed to handle daily use without warping, sagging, or becoming difficult to operate over time.
The difference between a decent gate and a properly built one usually shows up a few months later. A good installation should swing evenly, latch correctly, and stay aligned through regular use and changing weather. That is why we pay attention to the structure underneath just as much as the finished appearance people see from the outside.
Why Work With Us for Custom Metal & Electric Gate Needs in Burbank
- 20 Years of Experience in custom metal, electric, and automatic gate services
- Commercial & Residential Expertise for businesses, driveways, homes, and entry systems
- Custom-Built Solutions tailored to your property’s style, access, and security needs
- Full-Service Gate Company handling design, installation, repair, and maintenance
- Advanced Security Technology for reliable automated gate systems and access control
Get Free Estimates
Types of Backyard Metal Gate Installation Designs Offered by Burbank Custom Metal & Electric Gates
Wrought Iron Side Entrance Gates
Burbank Custom Metal & Electric Gates installs wrought iron side gates for strong side-yard access that keeps its curb appeal for the long haul, building them from thick iron bars, decorative scrollwork, and reinforced hinges that resist prying and sagging. To keep that strength locked in, our crew welds posts and plates into concrete or sets heavy-duty anchors so the gate stays true over time, then adds a lockable latch or keyed entry and a clear sealer or rust-inhibiting primer to slow corrosion.
Wrought iron sits naturally on traditional and Mediterranean homes common around Burbank, and you can dress it up with pickets, spear tops, or a custom pattern that matches your existing railings. Plan on a touch-up coat of paint every few years to stay ahead of the local sun and dry heat.
Steel Garden Gate Styles
When you want a modern face with serious strength, Burbank Custom Metal & Electric Gates turns to steel garden gates, shaping the panels flat, ribbed, or laser-cut and spanning wider openings without heavy framing. Galvanized steel keeps rust at bay, and our crew pairs it with a welded frame for extra rigidity, which makes these gates a clean fit for double-drive openings or wide side entries that need a slim profile and little maintenance.
From there, you control how open or private the gate feels, since the height, panel gaps, and hardware all adjust to manage visibility and airflow. For yards with soft landscaping, narrow bottom clearances keep pets and small children safely inside.
Powder-Coated Backyard Metal Entryways
For color that lasts, Burbank Custom Metal & Electric Gates recommends a powder-coated finish, since the dry powder bakes onto iron or steel and forms a thicker, more even layer than wet paint. That bonded coat resists chipping and fading under the strong Burbank sun, so you repaint far less often, whether you choose classic matte black or a custom RAL color matched to your trim and doors.
To make that finish last, our crew specifies UV-stable powders and preps every surface properly to prevent peeling. Paired with stainless steel hardware and hidden hinges, a powder-coated gate gives you a clean, modern entry that keeps working with very little upkeep.
Professional Backyard Metal Gate Installation Process in Burbank
1 - Backyard On-Site Assessment and Consultation
It starts at your property, where Burbank Custom Metal & Electric Gates measures the opening, checks slope and soil, and inspects any existing posts or footings. Our crew photographs the site and notes obstacles like driveways, irrigation lines, trees, and underground utilities, which head off surprises once installation begins.
That same visit settles the gate style, swing or slide operation, motor size, and access-control options, along with the power source location and whether trenching or conduit needs to go in. You receive a written quote with timelines and any permit needs, and nothing gets ordered or scheduled until you approve the plan.
2- Backyard Gate Material Selection and Preparation
With the plan set, Burbank Custom Metal & Electric Gates recommends materials based on exposure, security, and the look you are after, usually powder-coated steel for rust resistance or galvanized steel for heavy-duty use. Our crew then matches picket profile, frame thickness, and hinge hardware to the gate's size and expected load. The metal is cut, welded, and finished in our shop to tight tolerances, with sections pre-fitted and painted or powder-coated before delivery, so less time is spent on site.
That prep extends to automation as well, since the motor sizing and control parts like loop sensors, remotes, and keypads get chosen at this same stage. The wiring plan is then ready the moment the crew arrives to install.
3 - Backyard Metal Gate Expert Installation
When the build day comes, Burbank Custom Metal & Electric Gates sets precise reference lines and checks the level and plumb at the opening. New posts go into concrete footings sized to the soil and gate weight, while existing posts get tested for soundness and reinforced or replaced as needed. From there, we mount hinges, rollers, and frames, hang the gate, and tune the clearances for smooth operation. On sliding gates, that step also means fitting the track, rollers, and stops, and checking alignment across the full travel.
If automation is part of the job, our team installs the operator, runs conduit, and wires the controls to the motor, safety devices, and power source, then programs speeds, force limits, and remotes to match local code and manufacturer specs.
Why Burbank Homeowners Trust Burbank Custom Metal & Electric Gates for Backyard Metal Gate Installations
Local Backyard Gate Expertise in Burbank, CA
That local footing matters, since Burbank Custom Metal & Electric Gates has built gates across Burbank neighborhoods and knows the property styles and rules firsthand. Our crew designs around the lot sizes, driveway slopes, and curb cuts common near Magnolia Park, the Media District, and the surrounding residential streets.
Southern California weather shapes the material choices, too, so the gates carry corrosion-resistant finishes, UV-tolerant paint, and motors rated for regular heat cycles. We also handle the permit and HOA standards common around town, preparing drawings, pulling permits when required, and talking directly with inspectors to keep your project on schedule.
Backyard Gate Quality and Security Commitment
That local knowledge is backed by how the gates are built, since Burbank Custom Metal & Electric Gates fabricates from steel and wrought iron with welds and fittings that meet industry strength standards, then fits hardened hardware, tamper-resistant fasteners, and commercial-grade operators for dependable daily use. Every installation gets tested for smooth travel, proper clearance, and safe obstacle detection.
On automated gates, we program backup battery options and manual-release access, and add compatible intercom or keypad systems when you ask for them. Warranty terms are documented, and routine maintenance plans are available, giving you clear expectations on finish lifetimes, mechanical wear items, and prompt service if an adjustment becomes necessary.
Comprehensive Backyard Gate Service Offerings
Burbank Custom Metal & Electric Gates covers the full range, from custom design and fabrication through electrical setup and final commissioning, including site measurement, 3D or paper layout options, and finishes like powder-coat colors or brushed textures. Sliding, swing, and pedestrian gates all fall within that scope, along with operators, photo-eye safety systems, keypads, remote controls, fence tie-ins, masonry pier integration, and retrofits to existing posts and tracks.
Every project opens with an on-site estimate and a written quote that lists materials, labor, permit fees, and the expected timeline. From there, our crew coordinates scheduling to limit disruption and keeps communication open from the first measurement to the final test.
FAQs About Backyard Metal Gate Installation
What types of metal gates are best suited for a backyard entrance in Burbank?
Burbank Custom Metal & Electric Gates usually points backyard projects toward steel or aluminum, since steel brings stronger security and shrugs off impacts, while lighter aluminum resists rust and works easily with automatic openers. Wrought iron suits the ornate look of traditional Burbank homes, and simple tubular or panel designs fit modern, low-maintenance yards, so our crew matches the style to your home's architecture and how you plan to use the gate.
Do I need a permit to install a backyard metal gate on my property in Burbank?
In Burbank, many installations do need a permit, especially driveway gates or any gate that affects sidewalk clearance, sight lines, or vehicle access, and setback, height, and visibility rules can apply on top of that. Burbank Custom Metal & Electric Gates checks the local zoning, HOA rules, and building codes for every job, and when a permit is required, our crew prepares the drawings and handles the submittal to move approval along faster.
In Burbank, how long does a typical backyard metal gate installation take from measurement to completion?
A simple premade gate on standard posts usually takes Burbank Custom Metal & Electric Gates 1 to 3 days from final measurement to finished install, while a custom-fabricated gate runs 2 to 4 weeks for design and shop work, followed by 1 to 3 days on site. Adding an automatic opener, electrical work, or masonry posts can stretch that by several days, so our crew gives you a full project timeline once the design and scope are confirmed.
What factors influence the total cost of a custom metal gate installation in Burbank, CA?
Material drives much of the price, since aluminum typically costs less than steel and specialty metals run higher, and gate size, design complexity, and finish like powder coat or custom paint all add to the total. Site work pushes it further when Burbank Custom Metal & Electric Gates has to remove old structures, pour concrete footings, or repair fencing, and automation, safety sensors, intercoms, and electrical wiring raise the final figure as well.
Can an existing backyard gate be repaired or upgraded instead of fully replaced?
Yes. Burbank Custom Metal & Electric Gates often repairs hinges, posts, latches, and rusted sections to extend a gate's life, and realigning a sagging gate or reattaching loose hardware solves many problems at a lower cost than replacement. Upgrades like a new motor, added safety sensors, or a fresh powder-coat finish can restore both function and appearance, so our crew inspects the gate first and recommends repair whenever it is safe and cost-effective.